Dell PowerConnect M6348 Cli Reference Manual page 884

User Guidelines
There are no user guidelines for this command.
Example
The following example adds VLAN 2 to the virtual router tracked list (with a priority decrement
value of 20).
(config-if-vlan10)#ip vrrp 1 track interface vlan 2 decrement 20
ip vrrp track ip route
Use the ip vrrp track ip route command to track the route reachability. When the tracked route
is deleted, the priority of the VRRP router is decremented by the value specified in the priority
argument. When the tracked route is added, the priority is incremented by the same. A VRRP
configured interface can track more than one route. When a tracked route goes down, the
priority of the router is decreased by 10 (default priority decrement) for each downed route. By
default no routes are tracked. If we specify just the route to be tracked without giving the
priority which is optional then the default priority will be set.
Use the "no" form of this command to remove the route from the tracked list or to restore the
priority decrement to its default. When removing a tracked ip route from the tracked list,
priority should be incremented by the decrement value if the route is not reachable.
Syntax
ip-address/prefix-length priority
ip vrrp vrid track ip route [ decrement ]
vrid
—Virtual router identification (Range: 1–255).
ip-address/prefix-length
—Specifies the route to be tracked.
priority
—Priority decrement value for the tracked route (Range: 1–254).
Default Configuration
There are no routes tracked by default.
The default decrement priority is 10.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
884