Dell PowerConnect M6348 Cli Reference Manual page 633

show ip protocols
Use the show ip protocols command in Privileged EXEC mode to display the parameters and
current state of the active routing protocols.
Syntax
show ip protocols
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays parameters and current state of active routing protocols.
console#show ip protocols
Routing Protocol is "rip"
Sending updates every 30 seconds
Invalid after 180 seconds, hold down 120, flushed after 300
Redistributing: RIP, Static, OSPF
Default version control: send version 1, receive version 1
Interfaces:
Interface Send Receive Key-chain
-------- --------- ----------- ----------
176.1.1.1 1 1 flowers
176.2.1.1 passive 2
Routing Information Sources:
Gateway Last Update
176.1.1.2 0:00:17
Preference: 60
633