Dell PowerConnect M6348 Cli Reference Manual page 502

Default Configuration
No name is defined.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
The VLAN name must be unique.
Example
The following example names VLAN number 19 with the name "Marketing."
console(config)#interface vlan 19
console(config-if-vlan19)#name Marketing
protocol group
Use the protocol group command in VLAN Database mode to attach a VLAN ID to the
protocol-based group identified by
time. However, the VLAN association can be changed. The referenced VLAN should be created
prior to the creation of the protocol-based group except when GVRP is expected to create the
VLAN.
To detach the VLAN from this protocol-based group identified by this
of this command.
Syntax
protocol group
no protocol group
groupid — The protocol-based VLAN group ID, which is automatically generated when you
•
create a protocol-based VLAN group with the vlan protocol group command. To see the
group ID associated with the name of a protocol group, use the show port protocol all
command.
vlanid — A valid VLAN ID.
•
Default Configuration
This command has no default configuration.
Command Mode
VLAN Database mode
502
groupid
groupid vlanid
groupid vlanid
. A group may only be associated with one VLAN at a
groupid
, use the no form