Dell PowerConnect M6348 Cli Reference Manual page 319

Example
console(config-vlan)#ipv6 mld snooping querier 10
ipv6 mld snooping querier address
Use the ipv6 mld snooping querier address command to set the global MLD Snooping Querier
address. Use the "no" form of this command to reset the global MLD Snooping Querier address
to the default.
Syntax
ipv6 mld snooping querier address
no ipv6 mld snooping querier address
prefix — The bits of the address to be configured.
•
prefix-length — Designates how many of the high-order contiguous bits of the address make
•
up the prefix.
Default Configuration
There is no global MLD Snooping Querier address configured by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 mld snooping querier address Fe80::5
ipv6 mld snooping querier election participate
Use the ipv6 mld snooping querier election participate command to enable the Snooping
Querier to participate in the Querier Election process when it discovers the presence of another
Querier in the VLAN. When this mode is enabled, if the Snooping Querier finds that the other
Querier's source address is higher than the Snooping Querier's address, it stops sending periodic
queries. If the Snooping Querier wins the election then it will continue sending periodic
queries. Use the "no" form of this command to disable election participation on a VLAN.
Syntax
ipv6 mld snooping querier election participate
prefix /prefix-length
[ ]
vlan-id
319