Ipv6 Pimsm Spt-Threshold; Ipv6 Pimsm Ssm - Dell PowerConnect M6348 Cli Reference Manual

Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pimsm rp-candidate vlan 6 ff1e::/64

ipv6 pimsm spt-threshold

Use the ipv6 pimsm spt-threshold command to configure the Data Threshold rate for the last-
hop router to switch to the shortest path. Use the "no" form of this command to set the data
threshold to the default.
Syntax
threshold
ipv6 pimsm spt-threshold
no ipv6 pimsm spt-threshold
threshold — The threshold rate (Range: 0–2000 Kbps).
•
Default Configuration
The default threshold rate is 0.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pimsm spt-threshold 1000

ipv6 pimsm ssm

Use the ipv6 pimsm ssm command to define the Source Specific Multicast (SSM) range of
multicast addresses.
Syntax
ipv6 pimsm ssm { default | group-address/prefixlength }
656