Auto-VoIP Commands
This chapter explains the following commands:
•
show switchport voice
•
switchport voice detect auto
show switchport voice
Use the show switchport voice command to show the status of Auto-VoIP on an interface or all
interfaces.
Syntax
show switchport voice [interface {ethernet
interface — Specifies a valid interface. The full syntax is unit/port.
•
ethernet
index — Specifies the port-channel number.
•
port-channel
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show switchport voice
Interface
Auto VoIP Mode Traffic Class
---------
-------------- -------------
1/g1
Enabled
1/g2
Enabled
interface
| port-channel
6
6
index
}]
7
189