Dot1X Re-Authenticate; Dot1X Re-Authentication - Dell PowerConnect M6348 Cli Reference Manual

console(config-if-1/g2)# dot1x port-control mac-based

dot1x re-authenticate

Use the dot1x re-authenticate command in Privileged EXEC mode to enable manually
initiating a re-authentication of all 802.1X-enabled ports or the specified 802.1X-enabled port.
Syntax
interface
dot1x re-authenticate [ethernet ]
interface — Specifies a valid interface number. The full syntax is unit/port .
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following command manually initiates a re-authentication of the 802.1X-enabled port.
console# dot1x re-authenticate ethernet 1/g16

dot1x re-authentication

Use the dot1x re-authentication command in Interface Configuration mode to enable periodic
re-authentication of the client. To return to the default setting, use the no form of this
command.
Syntax
dot1x re-authentication
no dot1x re-authentication
Default Configuration
Periodic re-authentication is disabled.
Command Mode
Interface Configuration (Ethernet) mode
537