Dell PowerConnect M6348 Cli Reference Manual page 928

show sntp status
Use the show sntp status command in Privileged EXEC mode to show the status of the Simple
Network Time Protocol (SNTP).
Syntax
show sntp status
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following example shows the status of the SNTP.
console#show sntp status
Client Mode:
Last Update Time:
Unicast servers:
Server
---------
192.168.0.1
sntp authenticate
Use the sntp authenticate command in Global Configuration mode to require server
authentication for received Network Time Protocol (NTP) traffic. To disable the feature, use the
no form of this command.
Syntax
sntp authenticate
928
Status Last response
----------- --------------------------
Up 21:21:20 Mar 30 2009
Unicast
MAR 30 21:21:20 2009