Dell PowerConnect M6348 Cli Reference Manual page 932

User Guidelines
Up to 8 SNTP servers can be defined.
Use the sntp client enable command in Global Configuration mode to enable unicast clients
globally.
Polling time is determined by the sntp client poll timer <64-1024> global configuration
command.
Example
The following example configures the device to accept Simple Network Time Protocol (SNTP)
traffic from the server at IP address 192.1.1.1.
console(config)# sntp server 192.1.1.1
sntp trusted-key
Use the sntp trusted-key command in Global Configuration mode to authenticate the identity
of a system to which Simple Network Time Protocol (SNTP) will synchronize. To disable
authentication of the identity of the system, use the no form of this command.
Syntax
key-number
sntp trusted-key
key-number
no sntp trusted-key
key-number — Key number of authentication key to be trusted. (Range: 1–4294967295)
•
Default Configuration
No keys are trusted.
Command Mode
Global Configuration mode
User Guidelines
This command is relevant for both received Unicast and Broadcast.
Example
The following defines SNTP trusted-key.
console(config)# sntp authentication-key 8 md5 ClkKey
console(config)# sntp trusted-key 8
console(config)# sntp authenticate
932