Duplex
Speed
Neg
Link State
show statistics ethernet
Use the show statistics ethernet command in Privileged EXEC mode to display detailed
statistics for a specific port or for the entire switch.
Syntax
show statistics ethernet { <
unit — Physical switch identifier within the stack. Values are 1-12 .
•
port-type — Values are g for gigabit Ethernet port, or xg for 10 gigabit Ethernet port.
•
port — port number. Values are 1-24 or 1-48 for port_type g, and 1-4 for port_type xg.
•
Example: xg2 is the 10 gigabit Ethernet port 2.
•
switchport — Displays statistics for the entire switch.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Examples
The following examples show statistics for port 1/g1 and for the entire switch.
console#show statistics ethernet 1/g1
Total Packets Received (Octets)................ 779533115
Packets Received 64 Octets..................... 48950
Packets Received 65-127 Octets................. 482426
Packets Received 128-255 Octets................ 101084
Packets Received 256-511 Octets................ 163671
Packets Received 512-1023 Octets............... 4824
254
Displays the port Duplex status.
Refers to the port speed.
Describes the Auto-negotiation status.
Displays the Link Aggregation status.
unit
port-type
>/<
port
><
> | switchport }