Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the system-wide information for PIM-SM.
console#show ip pimsm
Admin Mode..................................... Disable
Join/Prune Interval (secs)..................... 60
Data Threshold Rate (Kbps)..................... 50
Register Threshold Rate (Kbps)................. 50
Interface
---------
show ip pimsm interface
Use the show ip pimsm interface command in Privileged EXEC mode to display interface
information for PIM-SM on the specified interface.
Syntax
show ip pimsm interface [ vlan
vlan-id — Valid VLAN ID
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
848
PIM-SM INTERFACE STATUS
Interface Mode
--------------
vlan-id
Protocol State
--------------
]