Dell PowerConnect M6348 Cli Reference Manual page 378

channel-group
Use the channel-group command in Interface Configuration mode to configure a port-to-port
channel. To remove the channel-group configuration from the interface, use the no form of this
command.
Syntax
channel-group
no channel-group
port-channel-number — Number of a valid port-channel for the current port to join.
•
• on — Forces the port to join a channel without LACP.
• auto — Forces the port to join a channel with LACP.
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how port 1/g5 is configured to port-channel number 1 without
LACP .
console(config)# interface ethernet 1/g5
console(config-if-1/g5)# channel-group 1 mode on
interface port-channel
Use the interface port-channel command in Global Configuration mode to configure a
port-channel type and enter port-channel configuration mode.
Syntax
interface port-channel
port-channel-number — A valid port-channel trunk index.
•
378
port-channel-number
mode {on|auto}
port-channel-number