Dell PowerConnect M6348 Cli Reference Manual page 608

show ip igmp-proxy
Use the show ip igmp-proxy command in Privileged EXEC mode to display a summary of the
host interface status parameters. It displays status parameters only when IGMP Proxy is
enabled.
Syntax
show ip igmp-proxy
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays a summary of the host interface status parameters.
console#show ip igmp-proxy
Interface Index................................ vlan13
Admin Mode..................................... Enable
Operational Mode............................... Enable
Version........................................ 3
Number of Multicast Groups..................... 0
Unsolicited Report Interval.................... 1
Querier IP Address on Proxy Interface.......... 0.0.0.0
Older Version 1 Querier Timeout................ 0
Older Version 2 Querier Timeout................ 0
Proxy Start Frequency.......................... 1
608