Dell PowerConnect M6348 Cli Reference Manual page 79

Command
show ipv6 pimsm interface
show ipv6 pimsm neighbor
show ipv6 pimsm rphash
show ipv6 pimsm rp mapping
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
IPv6 Routing
Command
clear ipv6 neighbors
clear ipv6 statistics
ipv6 address
ipv6 enable
ipv6 forwarding
ipv6 host
ipv6 mld last-member-query-
count
ipv6 mld last-member-query-
interval
ipv6 mld-proxy
ipv6 mld-proxy reset-status
ipv6 mld-proxy unsolicit-rprt-
interval
ipv6 mld query-interval
Description
Displays interface config parameters.
Displays IPv6 PIMSM neighbors learned on the routing
interfaces.
Displays which rendezvous point (RP) is being selected for a
specified group.
Displays all group-to-RP mappings of which the router is
aware (either configured or learned from the BSR).
Description
Clears all entries in the IPv6 neighbor table or an entry on a
specific interface.
Clears IPv6 statistics for all interfaces or for a specific
interface, including loopback and tunnel interfaces.
Configures an IPv6 address on an interface (including
tunnel and loopback interfaces).
Enables IPv6 routing on an interface (including tunnel and
loopback interfaces) that has not been configured with an
explicit IPv6 address.
Enables IPv6 forwarding on a router.
Defines static host name-to- ipv6 address mapping in the
host cache.
Sets the number of listener-specific queries sent before the
router assumes that there are no local members on the
interface.
Sets the last member query interval for the MLD interface,
which is the value of the maximum response time
parameter in the groupspecific queries sent out of this
interface.
Enables MLD Proxy on the router.
Resets the host interface status parameters of the MLD
Proxy router.
Sets the unsolicited report interval for the MLD Proxy
router.
Sets the MLD router's query interval for the interface.
Mode*
PE
PE
PE
PE
Mode*
PE
PE
IC
IC
GC
GC
IC
(VLAN)
IC
(VLAN)
IC
IC
IC
IC
79