Radius-Server Key - Dell PowerConnect M6348 Cli Reference Manual

Default Configuration
The default server type is authentication. The default server name is "Default RADIUS Server".
The default port number is 1812 for an authentication server and 1813 for an accounting server.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example specifies a Radius server host with the following characteristics:
Server host IP address — 192.168.10.1
console(config)#radius-server host 192.168.10.1

radius-server key

Use the radius-server key command in Global Configuration mode to set the authentication
and encryption key for all Radius communications between the switch and the Radius server. To
reset to the default, use the no form of this command.
Syntax
[key-string]
radius-server key
no radius-server key
key-string — Specifies the authentication and encryption key for all Radius communications
•
between the switch and the Radius server. This key must match the encryption used on the
Radius server. (Range: 1-128 characters)
Default Configuration
The default is an empty string.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
445