Priority - Dell PowerConnect M6348 Cli Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example displays how to specify server port number 1200.
console(tacacs)#port 1200

priority

Use the priority command in TACACS Configuration mode to specify the order in which
servers are used, where 0 (zero) is the highest priority.
Syntax
priority [ priority ]
priority — Specifies the priority for servers. 0 (zero) is the highest priority. (Range: 0–65535)
•
Default Configuration
If left unspecified, this parameter defaults to 0 (zero).
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to specify a server priority of 10000.
console(config-tacacs)#priority 10000
show tacacs
Use the show tacacs command in Privileged EXEC mode to display the configuration and
statistics of a TACACS+ server.
Syntax
ip-address
show tacacs [
ip-address —
• The name or IP address of the host.
]
491