Cos-Queue Strict - Dell PowerConnect M6348 Cli Reference Manual

User Guidelines
The maximum number of queues supported per interface is seven.
Example
The following example displays how to specify the minimum transmission bandwidth for seven
interfaces.
console(config)#cos-queue min-bandwidth

cos-queue strict

Use the cos-queue strict command in either Global Configuration mode or Interface
Configuration mode to activate the strict priority scheduler mode for each specified queue. To
restore the default weighted scheduler mode for each specified queue, use the no form of this
command.
Syntax
queue-id-1
cos-queue strict {
queue-id-1
no cos-queue strict {
• queue-id-1 — Specifies the queue ID for which you are activating the strict priority scheduler.
You can specify a queue ID for as many queues as you have (queue-id 1 through queue-id-n).
(Range: 0–6)
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode or Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to activate the strict priority scheduler mode for two
queues.
console(config)#cos-queue strict 1 2
The following example displays how to activate the strict priority scheduler mode for three
queues.
console(config)#cos-queue strict 1 2 4
queue-id-2 queue-id-n
} [{ } ... {
queue-id-2
} [{ } ... {
0 0 5 5 10 10 10
}]
queue-id-n
}]
399