Ip Irdp Preference - Dell PowerConnect M6348 Cli Reference Manual

Command line interface guide
Hide thumbs Also See for PowerConnect M6348:
Table of Contents

Advertisement

Default Configuration
The minimum interval value is 450.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets minimum advertisement interval at 100 seconds for VLAN 15.
console(config)#interface vlan 15
console(config-if-vlan15)#ip irdp minadvertinterval 100

ip irdp preference

Use the ip irdp preference command in Interface Configuration mode to configure the
preference of the address as a default router address relative to other router addresses on the
same subnet. Use the no form of the command to set the preference to the default value.
Syntax
integer
ip irdp preference
no ip irdp preference
integer — Preference of the address as a default router address, relative to other router
addresses on the same subnet. (Range: -2147483648 to 2147483647)
Default Configuration
0 is the default value.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the ip irdp preference to 1000 for VLAN 15.
console(config)#interface vlan 15
855

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents