Ip Irdp Address - Dell PowerConnect M6348 Cli Reference Manual

ip irdp
Use the ip irdp command in Interface Configuration mode to enable Router Discovery on an
interface. Use the no form of the command to disable Router Discovery.
Syntax
ip irdp
no ip irdp
Default Configuration
Disabled is the default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example enables router discovery on the selected interface.
console(config)#interface vlan 15
console(config-if-vlan15)#ip irdp

ip irdp address

Use the ip irdp address command in Interface Configuration mode to configure the address
that the interface uses to send the router discovery advertisements. Use the no form of the
command to return the address to the default.
Syntax
ip irdp address
no ip irdp address
ip-address — IP address for router discovery advertisements. (Range: 224.0.0.1 [all-hosts IP
•
multicast address] or 255.255.255.255 [limited broadcast address])
Default Configuration
IP address 224.0.0.1 is the default configuration.
852
ip-address