Dell PowerConnect M6348 Cli Reference Manual page 67

Command
key
msgauth
name
primary
priority
radius-server deadtime
radius-server host
radius-server key
radius-server retransmit
radius-server source-ip
radius-server timeout
retransmit
show radius-servers
show radius-servers statistics
source-ip
timeout
usage
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
Description
Sets the authentication and encryption key for all
RADIUS communications between the switch and the
RADIUS daemon
.
Enables the message authenticator attribute to be used for
the RADIUS Authenticating server being configured.
Assigns a name to a RADIUS server.
Specifies that a configured server should be the primary
server in the group of authentication servers which have the
same server name.
Specifies the order in which the servers are to be used, with
0 being the highest priority.
Improves RADIUS response times when servers are
unavailable. Causes the unavailable servers to be skipped.
Specifies a RADIUS server host.
Sets the authentication and encryption key for all RADIUS
communications between the switch and the RADIUS
daemon.
Specifies the number of times the software searches the list
of RADIUS server hosts.
Specifies the source IP address used for communication
with RADIUS servers.
Sets the interval for which a switch waits for a server host to
reply
Specifies the number of times the software searches the list
of RADIUS server hosts before stopping the search.
Displays the RADIUS server settings.
Shows the statistics for an authentication or accounting
server.
Specifies the source IP address to be used for
communication with RADIUS servers.
Sets the timeout value in seconds for the designated radius
server.
Specifies the usage type of the server.
Mode*
R
R
R
R
R
GC
GC
GC
GC
GC
GC
R
PE
PE
R
R
R
67