Dell PowerConnect M6348 Cli Reference Manual page 348

Syntax
lldp notification
no lldp notification
Default Configuration
By default, notifications are disabled on all supported interfaces.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to enable remote data change notifications.
console(config-if-1/g3)#lldp notification
lldp notification-interval
Use the lldp notification-interval command in Global Configuration mode to limit how
frequently remote data change notifications are sent. To return the notification interval to the
factory default, use the no form of this command.
Syntax
lldp notification-interval
no lldp notification-interval
• interval — The smallest interval in seconds at which to send remote data change
notifications. (Range: 5–3600 seconds)
Default Configuration
The default value is 5 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
348
interval