Dell PowerConnect M6348 Cli Reference Manual page 304

Example
The following example displays ARP table information.
console#show arp switch
MAC Address
------------------- ---------------- ------------
0016.9CE1.D800
show hosts
Use the show hosts command in User EXEC mode to display the default domain name, a list of
name server hosts, and the static and cached list of host names and addresses. The command
itself shows hosts [hostname].
• Host name. (Range: 1–255 characters)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about IP hosts.
console>show hosts
Host name:
Default domain: gm.com, sales.gm.com, usa.sales.gm.com
Name/address lookup is enabled
Name servers (Preference order): 176.16.1.18 176.16.1.19
Configured host name-to-address mapping:
Host
--------------------------
accounting.gm.com
304
IP Address Interface
10.27.6.1
Addresses
----------------------------
176.16.8.8
1/g37