Dell PowerConnect M6348 Cli Reference Manual page 677

Syntax
ipv6 nd other-config-flag
no ipv6 nd other-config-flag
Default Configuration
False is the default configuration.
Command Mode
Interface Configuration (VLAN, Tunnel, Loopback) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets to true the "other stateful configuration" flag in router
advertisements
console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 nd other-config-flag
ipv6 nd prefix
Use the ipv6 nd prefix command to configure parameters associated with prefixes that the
router advertises in its router advertisements.
Syntax
prefix/prefix-length
ipv6 nd prefix
[no-autoconfig] [off-link]
no ipv6 nd prefix prefix/
prefix — IPv6 prefix.
•
prefix-length — IPv6 prefix length.
•
valid-lifetime — Valid lifetime of the router in seconds. (Range: 0–4294967295 seconds)
•
• infinite — Indicates lifetime value is infinite.
preferred-lifetime — Preferred-lifetime of the router in seconds. (Range: 0–4294967295
•
seconds)
• no-autocoding — Do not use Prefix for autoconfiguration.
• off-link — Do not use Prefix for onlink determination.
valid-lifetime
[{
prefix-length
preferred-lifetime
| infinite} { | infinite}]
677