Dell PowerConnect M6348 Cli Reference Manual page 694

show ipv6 mld-proxy
Use the show ipv6 mld-proxy command to display a summary of the host interface status
parameters.
Syntax
show ipv6 mld-proxy
Command Mode
Privileged EXEC mode
Default Configuration
There is no default configuration for this command.
User Guidelines
The command displays the following parameters only when you enable MLD Proxy:
Interface Index
Admin Mode
Operational Mode
Version
Number of Multicast
Groups
Unsolicited Report
Interval
Querier IP Address on
Proxy Interface
Older Version 1 Querier
Timeout
Proxy Start Frequency
Example
console#show ipv6 mld-proxy
Interface Index................................ vlan 10
Admin Mode..................................... Enabled
Operational Mode............................... Enabled
694
The interface number of the MLD Proxy interface.
Indicates whether MLD Proxy is enabled or disabled. This is a configured value.
Indicates whether MLD Proxy is operationally enabled or disabled. This is a
status parameter.
The present MLD host version that is operational on the proxy interface.
The number of multicast groups that are associated with the MLD-Proxy
interface.
The time interval at which the MLD-Proxy interface sends unsolicited group
membership reports.
The IP address of the Querier, if any, in the network attached to the upstream
interface (MLD-Proxy interface).
The interval used to timeout the older version 1 queriers.
The number of times the MLD-Proxy has been stopped and started.