Dell PowerConnect M6348 Cli Reference Manual page 195

isdp advertise-v2
The isdp advertise-v2 command enables the sending of ISDP version 2 packets from the device.
Use the "no" form of this command to disable sending ISDP version 2 packets.
Syntax
isdp advertise-v2
no isdp advertise-v2
Default Configuration
ISDP sends version 2 packets by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#isdp advertise-v2
isdp enable
The isdp enable command enables ISDP on the switch. User the "no" form of this command to
disable ISDP . Use this command in global configuration mode to enable the ISDP function on
the switch. Use this command in interface mode to enable sending ISDP packets on a specific
interface.
Syntax
isdp enable
no isdp enable
Default Configuration
ISDP is enabled.
Command Mode
Global Configuration mode.
Interface (Ethernet) configuration mode.
195