Ip Igmp Snooping Groupmembership-Interval - Dell PowerConnect M6348 Cli Reference Manual

ip igmp snooping groupmembership-interval

This command sets the IGMP Group Membership Interval time on a VLAN. The Group Membership
Interval time is the amount of time in seconds that a switch waits for a report from a particular group on
a particular interface before deleting the interface from the entry. This value must be greater than the
IGMPv3 Maximum Response time value. The range is 2 to 3600 seconds. The no form of this command
sets the IGMPv3 Group Membership Interval time to the default value.
Syntax
ip igmp snooping groupmembership-interval
no ip igmp snooping groupmembership-interval
vlan-id — Number assigned to the VLAN
•
• seconds — IGMP group membership interval time in seconds. (Range: 2–3600)
Default Configuration
The default group membership interval time is 260 seconds.
Command Mode
VLAN Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures an IGMP snooping group membership interval of 520 seconds.
console(config-vlan)#ip igmp snooping groupmembership-interval 2 520
vlan-id seconds
281