Default-Information Originate - Dell PowerConnect M6348 Cli Reference Manual

console(config)#ipv6 router ospf
console(config-rtr)#area 1 virtual-link 2 transmit-delay 20

default-information originate

Use the default-information originate command in Router OSPFv3 Configuration mode to
control the advertisement of default routes. Use the no form of the command to return the
default route advertisement settings to the default value.
Syntax
default-information originate [always] [metric
no default-information originate [metric] [metric-type]
• always — Always advertise default routes.
integer — The metric (or preference) value of the default route. (Range: 1–16777214)
•
• 1—External type-1 route.
• 2—External type-2 route.
• metric — Specify the metric of the default route.
• metric-type — Specify metric-type of the default route.
Default Configuration
2 is the default value for metric-type.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example controls the advertisement of default routes by defining a metric value
of 100 and metric type 2.
console(config)#ipv6 router ospf
console(config-rtr)#default-information originate metric 100
metric-type 2
808
integer
] [metric-type {1 | 2}]