Ip Arp Inspection Vlan; Permit Ip Host Mac Host - Dell PowerConnect M6348 Cli Reference Manual

ip arp inspection vlan

Use the ip arp inspection vlan command to enable Dynamic ARP Inspection on a single VLAN
or a range of VLANs. Use the "no" form of this command to disable Dynamic ARP Inspection
on a single VLAN or a range of VLANs.
Syntax
ip arp inspection vlan
no ip arp inspection vlan
vlan-range — A valid range of VLAN IDs.
•
• logging — Use this parameter to enable logging of invalid packets.
Default Configuration
Dynamic ARP Inspection is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip arp inspection vlan 200-300
console(config)#ip arp inspection vlan 200-300 logging

permit ip host mac host

Use the permit ip host mac host command to configure a rule for a valid IP address and MAC
address combination used in ARP packet validation. Use the "no" form of this command to
delete an ARP ACL rule.
Syntax
permit ip host
no permit ip host
sender-ip — Valid IP address used by a host.
•
sender-mac —Valid MAC address in combination with the above sender-ip used by a host.
•
228
vlan-range
[ logging ]
vlan-range
[ logging ]
sender-ip sender-mac
max host
sender-ip sender-mac
max host