Dell PowerConnect M6348 Cli Reference Manual page 84

Command line interface guide
Hide thumbs Also See for PowerConnect M6348:
Table of Contents

Advertisement

Command
area range
area stub
area stub no-summary
area virtual-link
area virtual-link authentication
area virtual-link dead-interval
area virtual-link hello-interval
area virtual-link retransmit-
interval
area virtual-link transmit-delay
auto-cost
bandwidth
capability opaque
clear ip ospf
default-information originate
default-metric
distance ospf
distribute-list out
enable
exit-overflow-interval
external-lsdb-limit
ip ospf area
84
Description
Creates a specified area range for a specified NSSA.
Creates a stub area for the specified area ID.
Prevents Summary LSAs from being advertised into the
NSSA.
Creates the OSPF virtual interface for the specified area-id
and neighbor router.
Configures the authentication type and key for the OSPF
virtual interface identified by the area ID and neighbor ID.
Configures the dead interval for the OSPF virtual interface
on the virtual interface identified by area-id and neighbor
router.
Configures the hello interval for the OSPF virtual interface
on the virtual interface identified by the area ID and
neighbor ID.
Configures the retransmit interval for the OSPF virtual
interface on the virtual interface identified by the area ID
and neighbor ID.
Configures the transmit delay for the OSPF virtual
interface on the virtual interface identified by the area ID
and neighbor ID.
Allows user to change the reference bandwidth used in
computing link cost.
Allows user to change the bandwidth used in computing
link cost.
Enables Opaque Capability on the router.
Resets specific OSPF states.
Controls the advertisement of default routes.
Sets a default for the metric of distributed routes.
Sets the route preference value of OSPF in the router.
Specifies the access list to filter routes received from the
source protocol.
Resets the default administrative mode of OSPF in the
router (active).
Configures the exit overflow interval for OSPF.
Configures the external LSDB limit for OSPF.
Enables OSPFv2 and sets the area ID of an interface.
Mode*
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
IC
RC
PE
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
ROSPF
IC

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents