Dell PowerConnect M6348 Cli Reference Manual page 326

ip verify source port-security
Use the ip verify source port-security command in Interface Configuration mode to enable
filtering of IP packets matching the source IP address and the source MAC address.
Syntax
ip verify source port-security
Default Configuration
By default, IPSG is disabled on all interfaces.
Command Mode
Interface Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config-if-1/g1)#ip verify source port-security
ip verify binding
Use the ip verify binding command in Global Configuration mode to configure static bindings.
Syntax
ip verify binding <macaddr> vlan <ipaddr> interface
Default Configuration
By default, there will not be any static bindings configured.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)#ip verify binding 00:11:22:33:44:55 vlan 1
1.2.3.4 interface 1/g2
326