User Guidelines
This command has no user guidelines.
Example
The following example configures a threshold rate of 100 kilobits/sec.
console(config)#ip pimsm spt-threshold 100
ip pim-trapflags
Use the ip pim-trapflags command in Global Configuration mode to enable the PIM trap mode
for both Sparse Mode (SM) and Dense Mode (DM).
Syntax
ip pim-trapflags
no ip pim-trapflags
Default Configuration
Disabled is the default state.
Command Mode
Global Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example enables PIM trap mode.
console(config)#ip pim-trapflags
show ip pimsm
Use the show ip pimsm command in Privileged EXEC mode to display the system-wide
information for PIM-SM.
Syntax
show ip pimsm
847