Negotiation - Dell PowerConnect M6348 Cli Reference Manual

Syntax
bytes
mtu
no mtu
bytes — Number of bytes (Range: 1518-9216)
•
Default Configuration
The default number of bytes is 1518 (1522 bytes of VLAN-tagged frames).
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
The value set allows an additional four bytes for the VLAN tag.
Example
The following example of the mtu command increases maximum packet size to 9216 bytes.
console(config-if-1/g5)#mtu 9216

negotiation

Use the negotiation command in Interface Configuration mode to enable auto-negotiation
operation for the speed and duplex parameters of a given interface. To disable negotiation, use
the no form of this command.
Syntax
negotiation [capability1 [capability2...capability5]]
no negotiation
• capabilities — Specifies capabilities to advertise. (Possible values: 10h, 10f, 100h,
100f, and 1000f)
Default Configuration
If unspecified, defaults to list of all capabilities of the port.
Command Mode
Interface Configuration (Ethernet) mode
240