Show Interfaces Configuration - Dell PowerConnect M6348 Cli Reference Manual

console# show interfaces advertise ethernet 1/g1
Port: Ethernet 1/g1
Type: 1G-Copper
Link state: Up
Auto negotiation: enabled
10h 10f 100h 100f 1000f
Admin Local Link ------ ------ ------ ------ ------
Advertisement yes

show interfaces configuration

Use the show interfaces configuration command in User EXEC mode to display the
configuration for all configured interfaces.
Syntax
show interfaces configuration [ethernet
interface — Valid Ethernet port.
•
port-channel-number — Valid port-channel index.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no use guidelines.
Example
The following example displays the configuration for all configured interfaces:
console>show interfaces configuration
Port Type
----- ------------------------------
242
yes yes yes
interface
| port-channel
Duplex
------
no
port-channel-number
Speed Neg Admin
State
------- ---- -----
]