Negotiation - Dell PowerConnect M6348 Cli Reference Manual

User Guidelines
This command has no user guidelines.
Example
console(config)#port-aggregator group 1
console(config-aggregator-1)#mtu disable
console(config-aggregator-1)#

negotiation

Use the negotiation command in port aggregator mode to enable auto-negotiation of all member ports
in the aggregator group/zone. To disable negotiation, use the no form of this command.
Syntax
negotiation
no negotiation
Default Configuration
This command has no default configuration.
Command Mode
Port Aggregator mode
User Guidelines
This command has no user guidelines.
Example
console(config)#port-aggregator group 1
console(config-aggregator-1)#negotiation
console(config-aggregator-1)#
no lacp
Use the no lacp command to set the LACP (Link Aggregation) mode to default for that Aggregator
Group. The default LACP mode is dynamic.
Syntax
no lacp
372