Dell PowerConnect M6348 Cli Reference Manual page 681

Command Mode
Interface Configuration (VLAN, Tunnel, Loopback) mode
User Guidelines
This command has no user guidelines.
Example
The following example suppresses router advertisement transmission.
console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 nd suppress-ra
ipv6 pimdm
Use the ipv6 pimdm command to enable PIM-DM Multicast Routing Mode across the router in
global configuration mode or on a specific routing interface in interface mode. Use the "no"
form of this command to disable PIM-DM.
Syntax
ipv6 pimdm
no ipv6 pimdm
Default Configuration
IPv6 PIM-DM is disabled by default.
Command Mode
Global Configuration mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pimdm
681