Area Nssa No-Redistribute - Dell PowerConnect M6348 Cli Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example configures the default metric value for the default route advertised into
the NSSA.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 nssa default-info-originate

area nssa no-redistribute

Use the area nssa no-redistribute command in Router OSPFv3 Configuration mode to
configure the NSSA ABR so that learned external routes will not be redistributed to the NSSA.
Use the no form of the command to remove the configuration.
Syntax
areaid
area nssa no-redistribute
areaid
no area nssa no-redistribute
areaid — Valid OSPF area identifier.
•
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the area 1 NSSA ABR so that learned external routes will not
be redistributed to the NSSA.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 nssa no-redistribute
799