Show Interfaces Counters - Dell PowerConnect M6348 Cli Reference Manual

show interfaces counters

Use the show interfaces counters command in User EXEC mode to display traffic seen by the
interface.
Syntax
show interfaces counters [ethernet
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel index.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode and Privileged EXEC mode
User Guidelines
This command has no user guidelines.
The following table describes the fields shown in the display:
Field
InOctets
InUcastPkts
InMcastPkts
InBcastPkts
OutOctets
OutUcastPkts
OutMcastPkts
OutBcastPkts
Alignment Errors
FCS Errors
Single Collision Frames
244
interface
| port-channel
Description
Counted received octets.
Counted received Unicast packets.
Counted received Multicast packets.
Counted received Broadcast packets.
Counted transmitted octets.
Counted transmitted Unicast packets.
Counted transmitted Multicast packets.
Counted transmitted Broadcast packets.
A count of frames received that are not an integral number of octets in
length and do not pass the FCS check.
Counted frames received that are an integral number of octets in length
but do not pass the FCS check.
Counted frames that are involved in a single collision, and are
subsequently transmitted successfully.
port-channel-number
]