Distance Rip; Default-Metric - Dell PowerConnect M6348 Cli Reference Manual

Example
console(config-router)#default-information originate

default-metric

Use the default-metric command in Router RIP Configuration mode to set a default for the
metric of distributed routes. Use the no form of the command to return the metric to the
default value.
Syntax
integer
default-metric
no default-metric
integer — Metric for the distributed routes. (Range: 1-15)
•
Default Configuration
Default metric is not configured by default.
Command Mode
Router RIP Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets a default of 12 for the metric of distributed routes.
console(config-router)#default-metric 12

distance rip

Use the distance rip command in Router RIP Configuration mode to set the route preference
value of RIP in the router. Lower route preference values are preferred when determining the
best route. Use the no form of the command to return the preference to the default value.
Syntax
integer
distance rip
no distance rip
integer — RIP route preference. (Range: 1-255)
•
859