Dell PowerConnect M6348 Cli Reference Manual page 882

Default Configuration
priority
has a default value of 100.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
Example
The following example sets the priority value for the virtual router for VLAN 15.
console(config-if-vlan15)#ip vrrp 5 priority 20
ip vrrp timers advertise
Use the ip vrrp timers advertise command in Interface Configuration mode to set the
frequency, in seconds, that an interface on the specified virtual router sends a virtual router
advertisement. Use the no form of the command to return the advertisement frequency to the
default value.
Syntax
vr-id
ip vrrp
vr-id
no ip vrrp
vr-id — The virtual router identifier. (Range: 1-255)
•
seconds — The frequency at which an interface on the specified virtual router sends a virtual
•
router advertisement. (Range: 1-255 seconds)
Default Configuration
seconds
has a default value of 1.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
This command has no user guidelines.
882
seconds
timers advertise
priority