Command
show interfaces configuration
show interfaces counters
show interfaces description
show interfaces status
show statistics ethernet
show storm-control
shutdown
speed
storm-control broadcast
storm-control multicast
storm-control unicast
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
GVRP
Command
clear gvrp statistics
garp timer
gvrp enable (global)
gvrp enable (interface)
gvrp registration-forbid
gvrp vlan-creation-forbid
show gvrp configuration
show gvrp error-statistics
show gvrp statistics
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
56
Description
Displays the configuration for all configured interfaces.
Displays traffic seen by the physical interface.
Displays the description for all configured interfaces.
Displays the status for all configured interfaces.
Displays statistics for one port or for the entire switch.
Displays the storm control configuration.
Disables interfaces.
Configures the speed of a given Ethernet interface when
not using auto-negotiation.
Enables Broadcast storm control.
Enables the switch to count Multicast packets together with
Broadcast packets.
Enables Unicast storm control.
Description
Clears all the GVRP statistics information.
Adjusts the GARP application join, leave, and leaveall
GARP timer values.
Enables GVRP globally.
Enables GVRP on an interface.
De-registers all VLANs, and prevents dynamic VLAN
registration on the port.
Enables or disables dynamic VLAN creation.
Displays GVRP configuration information,
timer values, whether GVRP and dynamic VLAN
creation is enabled, and which ports are running GVRP
Displays GVRP error statistics.
Displays GVRP statistics.
Mode*
UE
UE
UE
UE
PE
PE
IC
IC
IC
IC
IC
Mode*
PE
IC
GC
IC
IC
IC
including
PE
UE
UE