Ip Ospf Retransmit-Interval - Dell PowerConnect M6348 Cli Reference Manual

Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
A value of 1 is the highest router priority. A value of 0 indicates that the interface is not eligible
to become the designated router on this network.
Example
The following example sets the OSPF priority for the VLAN 15 router at 100.
console(config-if-vlan15)#ip ospf priority 100

ip ospf retransmit-interval

Use the ip ospf retransmit-interval command in Interface Configuration mode to set the OSPF
retransmit Interval for the specified interface. Use the no form of the command to return the
interval to the default value.
Syntax
ip ospf retransmit-interval
no ip ospf retransmit-interval
seconds — Number of seconds between link-state advertisement retransmissions for
•
adjacencies belonging to this router interface. This value is also used when retransmitting
database description and link-state request packets. (Range: 0–3600 seconds)
Default Configuration
5 is the default number of seconds.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
A value of 1 is the highest router priority. A value of 0 indicates that the interface is not eligible
to become the designated router on this network.
Example
The following example sets the OSPF retransmit Interval for VLAN 15 at 50 seconds.
console(config-if-vlan15)#ip ospf retransmit-interval 50
766
seconds