Show Radius-Servers - Dell PowerConnect M6348 Cli Reference Manual

show radius-servers

Use the show radius-servers command to display the list of configured RADIUS servers and the
values configured for the global parameters of the RADIUS client.
Syntax
show radius-servers [ accounting | authentication ] [ name [
accounting — This optional parameter will cause accounting servers to be displayed.
authentication — This optional parameter will cause authentication servers to be displayed.
name — This optional parameter will cause the server names to be displayed instead of the
server configuration parameters.
servername
— Will cause only the server(s) with
no global parameters displayed when this parameter is specified.
Default Configuration
Authentication servers are displayed by default.
Command Mode
Privileged EXEC mode
User Guidelines
The following fields are displayed:
Field
Configured Authentication
Servers
Configured Accounting Servers The number of RADIUS Accounting servers that have been configured.
Named Authentication Server
Groups
Named Accounting Server
Groups
Timeout
Retransmit
Deadtime
RADIUS Accounting Mode
server-name
Description
The number of RADIUS Authentication servers that have been
configured.
The number of configured named RADIUS server groups.
The number of configured named RADIUS server groups.
The configured timeout value, in seconds, for request retransmissions.
The configured value of the maximum number of times a request packet
is retransmitted.
The length of time an unavailable RADIUS server is skipped.
A Global parameter to indicate whether the accounting mode for all the
servers is enabled or not.
servername
]]
name to be displayed. There are
449