Radius-Server Retransmit - Dell PowerConnect M6348 Cli Reference Manual

Example
The following example sets the authentication and encryption key for all Radius
."
communications between the device and the Radius server to "dell-server
console(config)#radius-server key dell-server

radius-server retransmit

Use the radius-server retransmit command in Global Configuration mode to specify the
number of times the Radius client will retransmit requests to the Radius server. To reset the
default configuration, use the no form of this command.
Syntax
retries
radius-server retransmit
no radius-server retransmit
retries — Specifies the retransmit value. (Range: 1–10)
•
Default Configuration
The default is 3 attempts.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the number of times the Radius client attempts to retransmit
requests to the Radius server to 5 attempts.
console(config)#radius-server retransmit 5
446