Dell PowerConnect M6348 Cli Reference Manual page 513

console#
show vlan association subnet
Use the show vlan association subnet command in Privileged EXEC mode to display the VLAN
associated with a specific configured IP-Address and netmask. If no IP Address and net mask are
specified, the VLAN associations of all the configured IP-subnets are displayed.
Syntax
show vlan association subnet [
ip-address — Specifies IP address to be shown
•
ip-mask — Specifies IP mask to be shown
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The command has no user guidelines.
Example
The following example shows the case if no IP Subnet to VLAN association exists.
console#show vlan association subnet
IP Address
---------------- ---------------- -------
The IP Subnet to VLAN association does not exist.
switchport access vlan
Use the switchport access vlan command in Interface Configuration mode to configure the
VLAN ID when the interface is in access mode. To reconfigure the default, use the no form of
this command.
Syntax
switchport access vlan
no switchport access vlan
ip-address ip-mask
IP Mask
vlan-id
]
VLAN ID
513