Show Interfaces Cos-Queue - Dell PowerConnect M6348 Cli Reference Manual

Example
The following example shows how to display all interfaces in the system to which a DiffServ
policy has been attached.
console# show diffserv service brief
Interface Direction
----------- ----------- ------------ -------------------
1/g1 in

show interfaces cos-queue

Use the show interfaces cos-queue command in Privileged EXEC mode to display the
class-of-service queue configuration for the specified interface.
Syntax
show interfaces cos-queue [<
<unit>/<port-type><port> — Specifies a valid unit/port combination:
•
unit > — Physical switch identifier within the stack. Values are 1-12 .
– <
– < port-type > — Values are g for gigabit Ethernet port, or xg for 10 gigabit Ethernet port.
port > — port number. Values are 1-24 or 1-48 for port_type g, and 1-4 for port_type xg.
– <
Example: xg2 is the 10 gigabit Ethernet port 2.
port-channel number — Specifies a valid port-channel number. Range is 1-8.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
If the interface is specified, the class-of-service queue configuration of the interface is displayed.
If omitted, the most recent global configuration settings are displayed.
Examples
The following example displays the COS configuration with no unit/port or port-channel
parameter.
console#show interfaces cos-queue
OperStatus
Down
unit>/<port-type><port>
Policy Name
DELL
port-channel number
|port-channel ]
429