Rmon Event - Dell PowerConnect M6348 Cli Reference Manual

Default Configuration
The buckets configuration is 50. The interval configuration is 1800 seconds.
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode.
User Guidelines
This command cannot be executed on multiple ports using the interface range ethernet
command.
Example
The following example enables a Remote Monitoring (RMON) MIB history statistics group on
port 1/g8 with the index number "1" and a polling interval period of 2400 seconds.
console(config)#interface ethernet 1/g8
console(config-if-1/g8)#rmon collection history 1 interval 2400

rmon event

Use the rmon event command in Global Configuration mode to configure an event. To remove
an event, use the no form of this command. Also see the show rmon events command.
Syntax
rmon event
no rmon event
index — The event index. (Range: 1–65535)
•
type — The type of notification that the device generates about this event. Can have the
•
following values: none, log, trap, log-trap. In the case of log, an entry is made in the log table
for each event. In the case of trap, an SNMP trap is sent to one or more management stations.
• community
by this octet string. (Range: 0-127 characters)
• description
owner
•
name is an empty string.
Default Configuration
This command has no default configuration.
994
index type
[community
index
text — If an SNMP trap is to be sent, it is sent to the SNMP community specified
text — A comment describing this event. (Range 0-127 characters)
name — Enter a name that specifies who configured this event. If unspecified, the
text text
] [description ] [owner
name
]