Dell PowerConnect M6348 Cli Reference Manual page 191

Interface Auto VoIP Mode Traffic Class
--------- -------------- -------------
ch1 Disabled
The command output provides the following information:
• AutoVoIP Mode—The Auto VoIP mode on the interface.
• Traffic Class—The Cos Queue or Traffic Class to which all VoIP traffic is mapped. This is not
configurable and defaults to the highest COS queue available in the system for data traffic.
switchport voice detect auto
The switchport voice detect auto command is used to enable the VoIP Profile on all the
interfaces of the switch (global configuration mode) or for a specific interface (interface
configuration mode).Use the "no" form of the command to disable the VoIP Profile.
Syntax
switchport voice detect auto
no switchport voice detect auto
Default Configuration
This feature is disabled by default.
Command Mode
Global Configuration.
Interface (Ethernet, Port-channel) Configuration.
User Guidelines
This command has no user guidelines
Example
console(config)#switchport voice detect auto
console(config-if-1/g1)#switchport voice detect auto
6
191