prefix — Displays intra-area Prefix LSA.
•
•
router — Displays router LSAs.
•
unknown — Displays unknown area, AS or link-scope LSAs.
lsid — Specifies a valid link state identifier (LSID).
•
•
adv-router — Shows the LSAs that are restricted by the advertising router.
rtrid — Specifies a valid router identifier.
•
self-originate — Displays the LSAs in that are self originated.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the link state database when OSPFv3 is
enabled.
console#show ipv6 ospf database
Adv Router
Link Id
-------------- --------------- ----- -------- ---- ------- -------
1.1.1.1
2.2.2.2
Adv Router
Link Id
-------------- --------------- ----- -------- ---- ------- -------
2.2.2.2
Router Link States (Area 0.0.0.0)
Age
0
4
0
2
Network Link States (Area 0.0.0.0)
Age
636
Inter Network States (Area 0.0.0.0)
Sequence Csum Options Rtr Opt
80000034 54BD V6E--R- ----B
80000044 95A5 V6E--R- ----B
Sequence Csum Options Rtr Opt
636
80000001 8B0D V6E--R-
827