Dell PowerConnect M6348 Cli Reference Manual page 66

Command
show class-map
show classofservice dotlp-mapping Displays the current Dot1p (802.1p) priority mapping to
show classofservice ip-dscp-
mapping
show classofservice trust
show diffserv
show diffserv service interface
ethernet in
show diffserv service interface
port-channel in
show diffserv service brief
show interfaces cos-queue
show policy-map
show policy-map interface
show service-policy
traffic-shape
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 49.
Radius
Command
aaa accounting network default
start-stop group radius
auth-port
deadtime
66
Description
Displays all configuration information for the specified
class.
internal traffic classes for a specific interface.
Displays the current IP DSCP mapping to internal traffic
classes for a specific interface.
Displays the current trust mode setting for a specific
interface.
Displays the DiffServ General Status information.
Displays policy service information for the specified
interface and direction.
Displays policy service information for the specified
interface and direction.
Displays all interfaces in the system to which a DiffServ
policy has been attached.
Displays the class-of-service queue configuration for the
specified interface.
Displays all configuration information for the specified
policy.
Displays policy-oriented statistics information for the
specified interface and direction
Displays a summary of policy-oriented statistics
information for all interfaces in the specified direction.
Specifies the maximum transmission bandwidth limit for
the interface as a whole.
Description
Enables RADIUS accounting on the switch.
Sets the port number for authentication requests of
the designated radius server
Improves Radius response times when a server is
unavailable by causing the unavailable server to be skipped.
.
Mode*
PE
PE
PE
PE
PE
PE
PE
PE
PE
PE
PE
PE
GC and
IC
Mode*
GC
R
R