Dell PowerConnect M6348 Cli Reference Manual page 933

sntp unicast client enable
Use the sntp unicast client enable command in Global Configuration mode to enable a client
to use Simple Network Time Protocol (SNTP) predefined Unicast clients. To disable an SNTP
Unicast client, use the no form of this command.
Syntax
sntp unicast client enable
no sntp unicast client enable
Default Configuration
The SNTP Unicast client is disabled.
Command Mode
Global Configuration mode
User Guidelines
Use the sntp server command to define SNTP servers.
Examples
The following example enables the device to use Simple Network Time Protocol (SNTP) to
request and accept SNTP traffic from servers.
console(config)# sntp unicast client enable
clock timezone hours-offset
Use the clock timezone [ hours-offset ] [minutes
set the offset to Coordinated Universal Time (UTC). If the optional parameters are not
specified, they will be read as either '0' or '\0, as appropriate.
Syntax
clock timezone hours-offset [minutes
hours-offset — Hours difference from UTC. (Range: –12 to +13)
•
minutes-offset — Minutes difference from UTC. (Range: 0–59)
•
acronym — The acronym for the time zone. (Range: Up to four characters)
•
Command Mode
Global Configuration
minutes-offset
minutes-offset
] [zone
acronym
] [zone ] command to
acronym
]
933